User Manual Q&AAnswer
Feb 17, 2025 - 10:25 PM
To assemble the Aigostar 8433325184926 Stand Fan, follow these steps:
1. Loosen the screws, washers, and spring washers in the center section of the stand. Attach the extension pole to the base enclosure using these screws.
2. Loosen the height adjustment ring and lift the internal pole to its maximum height. Prevent the internal pole from slipping into the extension pole and then xxxx out the height adjustment ring.
3. Slide the stand ornament (cover for the stand) down the extension pole.
4. Reattach the height adjustment ring.
5. Loosen the height adjustment ring on the extension pole and adjust the internal pole to the desired height. If you can't find the internal pole, it slides inside the extension pole and can be pulled out.
6. Loosen the thumb xxxx on the bottom of the head unit. Place the head unit on the internal pole and tighten the thumb xxxx in alignment with the groove on the internal pole.
Please refer to the provided figures in the instruction manual for a visual representation of the assembly process.
Add New Comment