User Manual Q&AAnswer
Feb 17, 2025 - 10:22 PM
To assemble and install the BISSELL 2066F ProHeat 2x Revolution CleanShot, please follow the steps outlined in the instruction manual:
1. Unpack the machine and remove all packaging materials.
2. Attach the upper handle to the base of the machine. Align the holes on the handle with the studs on the base and push down firmly until it clicks into place.
3. Insert the clean water tank into the machine by aligning the arrows on the tank with the arrows on the machine. Push the tank down until it fits securely.
4. Fill the clean water tank with hot tap water up to the fill line. Do not use boiling water or add any cleaning solutions at this point.
5. Attach the clean water tank to the machine by sliding it into the back of the machine until it locks into place.
6. Attach the hose to the back of the machine by aligning the tabs on the hose connector with the slots on the machine. Push the hose connector in until it clicks into place.
7. Attach the desired tool to the end of the hose by aligning the tabs on the tool with the slots on the hose. Push the tool onto the hose until it clicks into place.
8. Plug the power cord into a grounded outlet.
9. Turn the power switch on the machine to the "On" position.
10. Press the trigger on the handle to release the cleaning solution and start cleaning.
For more detailed instructions and safety information, please refer to the BISSELL 2066F ProHeat 2x Revolution CleanShot Instruction Manual.
Add New Comment