User Manual Q&AAnswer
Feb 17, 2025 - 10:16 PM
To connect the Turbosound MANCHESTER Series Subwoofers to your amplifier and DSP, you will need to use heavy-duty speaker cable with a minimum wire size of 2.5 mm² (14 AWG), and preferably 4 mm² (12 AWG) for longer runs or where the total cabinet input impedance is less than 8 ohms. Always observe the correct polarity when connecting the cables. Use genuine NEUTRIX SPEAKON CONNECTORS for reliable operation.
For the MS215 and MS218 subwoofers, it is advised to construct SUB LINK cables wired: 2+ -> 1+ and 2- -> 1-. This is to power multiple MS215 and MS218 enclosures. To power two subwoofers per amplifier channel, you can use standard NL4 link cables from Lab Gruppen bi-wired NL4 outputs. For one subwoofer per amplifier channel, a single NL4 cable connects to the first subwoofer, and then the SUB LINK cable connects to the second subwoofer.
Please refer to the wiring diagrams in the manual for further details on how to properly connect the subwoofers to your amplifier and DSP.
Add New Comment