User Manual Q&AAnswer
Feb 17, 2025 - 10:13 PM
To clean the filter of the INVENTUM VDW9001W Front Load Heat Pump Dryer, please follow these steps:
1. Open the filter housing located inside the dryer.
2. Pull out the dryer filter.
3. Gently scrape the filter to remove any lint, fibers, and threads using your hand or a cloth.
4. If necessary, clean the filter housing and door gasket as well.
5. Insert the dryer filter back into the filter housing.
6. Close the filter housing securely.
It is important to clean the dryer filter after each use to prevent lint accumulation, which can block air circulation and result in longer drying times and increased energy consumption. Do not operate the dryer without the dryer filter.
If you have followed these steps and the drying performance is still not satisfactory, please refer to the troubleshooting section of the instruction manual or contact the customer service for further assistance.
Add New Comment