User Manual Q&AAnswer
Feb 17, 2025 - 10:10 PM
To install the ETNA KKV143 Freestanding Cabinet Model Refrigerator, please follow these steps:
1. Remove all packaging materials from the appliance.
2. Ensure that the appliance is not damaged. If it is, contact the store where you purchased it.
3. Choose a suitable location for the refrigerator. It should be placed in a dry and well-ventilated room, away from direct sunlight and heat sources such as radiators or cookers.
4. Leave a minimum distance of 5 cm between the appliance and the wall, back, and sides of a cupboard. This allows for proper air circulation around the appliance.
5. Make sure the appliance is placed on a flat and stable surface.
6. Connect the appliance to a properly grounded power supply using the provided plug. Do not use multi-plug adapters or extension cables.
7. Wait at least 4 hours before connecting the appliance to the power supply to allow the oil to flow back into the compressor.
8. Ensure that the ventilation openings of the appliance are clear and not obstructed.
9. Level the appliance using the adjustable feet.
10. Once the installation is complete, you can switch on the appliance and set the thermostat to the desired temperature.
For more detailed instructions and safety information, please refer to the ETNA KKV143 Freestanding Cabinet Model Refrigerators Instructions provided with the appliance.
Add New Comment