How do I install the SUPERATV ROOF-P-PROXP4-001 Polaris RZR PRO XP 4 Aluminum Roof? (SuperATV Polaris RZR PRO XP 4 Aluminum Roof Instruction Manual)

Answer

manuals.plus

Feb 17, 2025 - 10:09 PM

To install the SUPERATV ROOF-P-PROXP4-001 Polaris RZR PRO XP 4 Aluminum Roof, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

1. Install the seal to the frame in the locations shown. This will help create a watertight seal between the roof and the frame.

2. Install clip nuts to the locations shown. Repeat this step for the driver's side as well. Clip nuts are used to secure the roof to the frame.

3. Install the gasket and U-gasket to the front of the roof in the locations shown. These gaskets provide additional sealing and protection.

4. Place the front and rear of the roof onto the machine and secure it with the hardware shown. Make sure to tighten the hardware properly to ensure a secure fit.

Please note that any modifications or additions to the factory or aftermarket parts may void the warranty provided by SuperATV. It is recommended to contact SuperATV if you have any aftermarket products on your machine to verify compatibility.

Additionally, it is important to understand that installing lift kits, suspension kits, or other modifications may change the ride of your machine and increase maintenance and part wear. Always operate your off-road machine responsibly and avoid consuming alcohol or drugs while operating it.

Please refer to the instruction manual for more detailed information and safety guidelines. If you have any further questions or need assistance, you can contact SuperATV through their provided email, phone number, or website during their business hours.