User Manual Q&AAnswer
Feb 17, 2025 - 09:59 PM
To connect the MODECOM 5200C Wireless Keyboard and Mouse Set to your computer, please follow these steps:
1. Take the Nano receiver out of the box or the mouse. It is located under the upper casing of the mouse, which needs to be carefully removed beforehand.
2. Connect the Nano receiver to a USB port on your computer.
3. Place 2 AAA batteries (1.5V) in the keyboard. The battery container is located on the bottom of the keyboard.
4. Place 1 M battery (1.5V) in the mouse. The battery container is under the upper housing of the mouse, which should be carefully removed beforehand.
5. Switch the power switch to the "ON" position on both the keyboard and the mouse.
6. After a while, the combo set should start working. The LED on the keyboard, located above the battery symbol, will flash red for a while.
Please note that if the mouse battery level is low, the LED located in the upper left corner next to the scroll wheel will flash red. Similarly, when the keyboard battery is low, one of the keyboard LEDs located above the battery symbol will flash red.
Remember to use only alkaline batteries and keep the combo set away from children. If the combo set is not used for an extended period of time, it is recommended to remove the batteries.
For more information and details, please refer to the MODECOM 5200C Wireless Keyboard and Mouse Set user manual.
Add New Comment