User Manual Q&AAnswer
Feb 17, 2025 - 09:52 PM
To pair the Scene Selector with other smart home devices, follow these steps:
1. Ensure that the Scene Selector is within range of your smart home hub or gateway.
2. Press and hold the pairing button on the Scene Selector for a few seconds until the LED indicator starts flashing.
3. Put your smart home hub or gateway into pairing mode according to its instructions.
4. The Scene Selector should be automatically detected by your smart home hub or gateway. If not, refer to your hub or gateway's manual for specific pairing instructions.
5. Once the pairing is successful, the LED indicator on the Scene Selector will stop flashing.
For more detailed instructions, please refer to the "INSTRUCTION" section of the Datek Home Scene Selector User Manual.
Add New Comment