User Manual Q&AAnswer
Feb 17, 2025 - 09:51 PM
To pair the Datek HSE2919E Home Water Sensor with your smart home system, follow these steps:
1. Make sure your smart home system is compatible with Zigbee 3.0 and supports HA 2.1.
2. Insert two CR 2450 batteries into the sensor.
3. Place the sensor within range of your smart home system's Zigbee network.
4. On your smart home system's control panel or app, initiate the pairing process for a new device.
5. Press and hold the pairing button on the Datek HSE2919E Home Water Sensor for a few seconds until the LED indicator starts flashing.
6. The sensor should now be detected by your smart home system. Follow the on-screen instructions to complete the pairing process.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Datek HSE2919E Home Water Sensor.
Add New Comment