User Manual Q&AAnswer
Feb 17, 2025 - 09:40 PM
To set up the BlastAttack Softball Pitching Machine, follow these steps:
1. Carefully remove all pieces from the packaging.
2. Place the throwing head in position as shown in Figure A.
3. Install the undercarriage onto the throwing head by aligning the wing nut and bolt into the slot on the head assembly and tightening the wing nut.
4. Install all three legs by pushing them into the sockets. Each leg has a push button that locks it into place.
5. Using the grip handle, stand the machine up on its legs.
6. Loosen the wing nut and release the frame lock by pulling it out and turning it 90 degrees.
7. For vertical adjustment, loosen the elevation control handle.
8. The machine is now ready to use.
For more detailed instructions and illustrations, please refer to the "Set-up & Preparation" section in the BlastAttack Softball Pitching Machine User Manual.
Add New Comment