User Manual Q&AAnswer
Feb 17, 2025 - 09:37 PM
To set the current limit on the NUVVE EVSE-B PowerPort3 Ultra, follow the steps outlined in the "Critical Setting: Current Limit" section of the installation guide. The current limit setting is important to ensure that the EV's current drawn does not exceed the rating of the building circuit and the installed connector. The setting can be adjusted using a rotary switch located on the VEL board inside the unit. Refer to the table provided in the manual to determine the appropriate dial position based on the cable and breaker amps. Use a small flathead screwdriver to set the arrow of the rotary switch to the desired position. After changing the setting, update the input and output Amp ratings on the label on the side of the case using a permanent marker.
Add New Comment