User Manual Q&AAnswer
Feb 17, 2025 - 09:31 PM
To install SIM cards in the Thuraya IP Commander, follow these steps:
1. Remove the six screws from the access panel using a cross-point screwdriver.
2. Take off the access panel and set it aside.
3. If the gasket is loose, remove it and set it aside.
4. Install the SIM cards by inserting the Primary SIM card into the center opening labeled "PRIMARY." The SIM card is spring-loaded, so push it until you feel it snap into place. To remove the SIM card, press it until you feel it release and then remove it.
5. Carefully place the gasket back into the groove it was removed from, ensuring it is completely inside the groove with no overhang.
6. Replace the access panel by aligning the xxxx holes in the panel with the ones on the enclosure.
7. Insert and tighten the screws, ensuring the plate is properly aligned. Do not overtighten the screws.
For more detailed information and illustrations, please refer to the Thuraya IP Commander User Guide (SRTW part number 920-00275) provided with the product.
Add New Comment