User Manual Q&AAnswer
Feb 17, 2025 - 09:29 PM
To set up the CyberPower 1500VA Intelligent LCD UPS System, please follow the steps below:
1. Unpack the UPS system and remove all packaging materials.
2. Place the UPS system in a well-ventilated area away from direct sunlight and excessive heat.
3. Connect the UPS system to a grounded AC power outlet using the provided power cord.
4. Connect your equipment (such as computers, servers, or networking devices) to the UPS system using the provided power outlets.
5. Press the power button on the front panel of the UPS system to turn it on.
6. The LCD screen will display various information about the UPS system's status, including input voltage, output voltage, battery capacity, and load level.
7. Use the navigation buttons on the front panel to navigate through the LCD menu and configure settings as needed.
8. It is recommended to install the PowerPanel® Personal Edition software on your connected computer to monitor and manage the UPS system remotely. The software can be downloaded from the CyberPower website.
9. Refer to the user guide for more detailed instructions on configuring and using the UPS system.
For further assistance or troubleshooting, you can contact CyberPower's technical support at 877-297-6937 or via email at techsupport@cyberpower.com.
Add New Comment