User Manual Q&AAnswer
Feb 17, 2025 - 09:21 PM
To install the sensor or wireless control module on the greenlux Kasa Smart Series LED High Bay Light, follow these steps:
1. Identify the center-hollow design on the light fixture. This is where the sensor or control module will be installed.
2. Ensure that the power to the light fixture is turned off before proceeding with the installation.
3. Choose either a sensor or wireless control module based on your preference and requirements.
4. For sensor installation:
a. Insert the sensor into the center-hollow design of the light fixture.
b. Ensure that the sensor is securely attached and aligned properly.
c. Connect the wiring of the sensor according to the instructions provided with the sensor.
5. For wireless control module installation:
a. Insert the wireless control module into the center-hollow design of the light fixture.
b. Ensure that the module is securely attached and aligned properly.
c. Connect the wiring of the module according to the instructions provided with the module.
6. Once the sensor or control module is installed, restore power to the light fixture.
7. Follow the instructions provided with the sensor or control module to set up and configure the smart features of the greenlux Kasa Smart Series LED High Bay Light.
For more detailed instructions and diagrams, please refer to the user guide of the greenlux Kasa Smart Series LED High Bay Light.
Add New Comment