User Manual Q&AAnswer
Feb 17, 2025 - 09:20 PM
To connect the , follow these steps:
1. Turn on the controller by pressing the Home button. It will enter pairing mode, and all 4 LEDs will flash simultaneously.
2. On your iPhone, go to the Bluetooth menu in the settings and start a Bluetooth device search.
3. In the list of available devices, you should see the controller named 'MG-X MFI'. Select it.
4. Wait for the controller to be successfully paired with your iPhone. Once paired, the controller will appear in the list of paired devices.
5. The controller can store up to 5 devices, and it will automatically connect to the most recent device it was synced with.
If you want to reset the list of devices stored in the controller, follow these steps:
1. Turn on the controller by holding down the Home button.
2. Once the controller is turned on, release the Home button.
3. Press and hold the Home and Bluetooth buttons simultaneously for 5 seconds.
4. The controller will enter pairing mode again and should appear in the list of devices available for pairing on your iPhone.
Please refer to the "Syncing your iPhone® with the Nacon MG-X controller" section in the user guide for more detailed instructions and illustrations.
Add New Comment