User Manual Q&AAnswer
Feb 17, 2025 - 08:49 PM
To install the WATERWARE M22 Flow Regulated Aerator Insert into your existing aerator housing, please follow these steps:
1. Unscrew the existing aerator housing from your faucet spout.
2. Take the flow regulated aerator insert and place it into the housing.
3. If you have a female housing, use the thin washer provided. If you have a male housing, use the thick washer.
4. Reassemble the aerator housing onto the spout, making sure not to over tighten it.
5. Check for a good seal to ensure there are no leaks.
For further assistance or inquiries, you can contact WATERWARE at PH 09 273 9191 or email them at info@waterware.co.nz. You can also visit their website at waterware.co.nz.
Add New Comment