User Manual Q&AAnswer
Feb 17, 2025 - 08:48 PM
To adjust the temperature on the WATERWARE UF182 Underfloor Mixing Panel, follow these steps:
1. Locate the control xxxx on the panel. It is used to adjust the temperature.
2. Turn the control xxxx in a full turn (360°) between the minimum and maximum temperature settings.
3. To lock the temperature at the set value, use the tamper protection feature. Unscrew the upper xxxx on the control xxxx .
4. Remove the control xxxx and put it back on so that the internal reference couples with the protrusion on the xxxx carrier ring nut.
5. Once the control xxxx is securely in place, the temperature will be locked at the set value.
Please refer to the WATERWARE UF182 Underfloor Mixing Panel User Manual for more detailed instructions and illustrations.
Add New Comment