User Manual Q&AAnswer
Feb 17, 2025 - 08:38 PM
To pair the Scene Selector with other smart home devices, follow these steps:
1. Make sure the Scene Selector is within range of your smart home hub or gateway.
2. Press and hold the pairing button on the Scene Selector for a few seconds until the LED indicator starts flashing.
3. Put your smart home hub or gateway into pairing mode according to its instructions.
4. The Scene Selector should automatically be detected by your smart home hub or gateway. Follow the instructions provided by your hub or gateway to complete the pairing process.
5. Once paired, you can configure each button on the Scene Selector to control specific smart home devices through your hub or gateway's app or interface.
For more detailed instructions, please refer to the user guide provided with the Scene Selector.
Add New Comment