User Manual Q&AAnswer
Feb 17, 2025 - 08:24 PM
To install the REINA RND-RDA512SA Single Anthracite Radiator vertically, please follow these steps:
1. Ensure that you have all the supplied installation accessories, which should include brackets, screws, and plugs.
2. Choose a suitable location on the wall where you want to mount the radiator vertically. Make sure the wall can support the weight of the radiator.
3. Use a spirit level to ensure that the radiator will be mounted straight.
4. Mark the positions for the brackets on the wall, ensuring they are level and at the correct distance apart according to the dimensions provided in the manual.
5. Drill holes at the marked positions and insert the plugs.
6. Attach the brackets to the wall using the screws provided. Make sure they are securely fixed.
7. Carefully lift the radiator and hang it onto the brackets. Ensure that it is properly aligned and level.
8. Connect the radiator to the heating system using the 1/2" female pipe thread inlet and outlet. Use appropriate fittings and ensure they are tightened securely.
9. Once the radiator is installed, you can choose an optional rail color if desired. Refer to the manual for instructions on how to change the rail color.
10. Finally, check the operational pressure of your heating system and make sure it does not exceed 6 bar, as stated in the manual.
If you have any further questions or need additional assistance, you can contact REINA Design through their website at www.reinadesign.co.uk or email them at info@atayglobal.com. You can also reach them by phone at +441787238540.
Add New Comment