User Manual Q&AAnswer
Feb 17, 2025 - 06:23 AM
To adjust the temperature on the ATTEN ST-8802 2 In 1 Rework Station, press the A/V key on the left side of the LCD display when the station is in normal working mode. You can adjust the temperature by pressing the key for a short time or press and hold the key for a longer time to adjust it rapidly. The temperature value will be automatically saved after not pressing the key for 3 seconds.
To adjust the air flow, use the air volume xxxx located on the left side of the station. Rotate the xxxx clockwise to increase the air volume and counterclockwise to decrease it.
Please note that the temperature and air flow parameters cannot be adjusted if they are locked. Refer to the manual for more information on locking and unlocking these parameters.
Add New Comment