User Manual Q&AAnswer
Feb 17, 2025 - 06:21 AM
To use the Intermec PC Series USB-to-Serial Adapter, please follow the instructions below:
1. Connect the USB end of the adapter to an available USB port on your computer.
2. Connect the serial end of the adapter to the serial port of the device you want to communicate with. Ensure that the device is powered off before making the connection.
3. Once the adapter is connected, your computer should automatically recognize it and install the necessary drivers. If prompted, follow the on-screen instructions to complete the driver installation.
4. After the driver installation is complete, you can start using the adapter. Open the software or application that requires communication with the device and configure the appropriate serial port settings (baud rate, data bits, parity, stop bits, etc.) as specified in the device's user manual.
5. Once the settings are configured, you should be able to communicate with the device through the USB-to-Serial adapter.
For more detailed information on using the Intermec PC Series USB-to-Serial Adapter, please refer to the PC23 and PC43 Desktop Printer User Manual. This manual provides comprehensive instructions and troubleshooting tips for using the adapter with Intermec printers, but the general usage instructions should apply to other devices as well.
If you encounter any issues or have further questions, it is recommended to consult the user manual or contact Intermec Technologies directly for technical support.
Add New Comment