Answer

Feb 17, 2025 - 06:16 AM
To fit a disk onto the SEALEY CP20VAGX 20V Brushless Angle Grinder, follow these steps:
1. Ensure that the battery is removed from the grinder before fitting or removing the disk.
2. Lock the gearbox by undoing or tightening the flange and clamp nut.
3. Depress the button on the top surface of the tool head.
4. Choose the appropriate type of disk for your task (flat cutting disk, depressed center cutting disk, or depressed center or flat grinding disk).
5. Align the disk with the spindle and slide it onto the spindle.
6. Make sure the disk is securely in place.
7. Release the button on the tool head to lock the disk in place.
8. Adjust the guard to the desired position for maximum safety. Always work with the guard in place.
9. Before using the grinder, ensure that you are wearing approved safety goggles, ear defenders, appropriate dust mask if dust will be generated, and safety gloves.
10. Slide the ON/OFF switch forward and then depress it to lock it in the ON position.
11. To turn off the grinder, press the rear edge of the ON/OFF switch to release it and return it to the OFF position.
Please refer to the manual for more detailed instructions and safety precautions.
Add New Comment