User Manual Q&AAnswer
Feb 17, 2025 - 05:03 AM
To install the , please follow the installation procedure outlined in the provided manual. Here is a step-by-step guide:
1. Familiarize yourself with the luminaire and installation procedure, ensuring that the power is safely isolated before starting the installation.
2. Separate the LED/Diffuser plate from the main body by pulling it apart from one end.
3. The wiring and support straps are disconnected for ease of installation.
4. Offer the main body up to the ceiling and mark the fixing points. If using surface conduit, ensure that the beza boxes are at 600mm centers.
5. Drill and secure the main body in place, dressing the supply cable through either of the three rear entry points or end caps.
6. Connect the mains wiring as per the guide provided.
7. Offer up the LEDs and connect the two support straps in the main body to the two tags on the LED tray.
8. Connect the LED supply wire and earth connections, then snap the LED plate onto the main body, ensuring it is properly located along the whole length.
9. Turn on the power and test the luminaire.
Please note that these instructions are a general guide, and it is recommended to have a qualified electrician perform the installation to ensure compliance with current IEE wiring regulations and local building control.
If you have any further questions or need assistance, you can contact KSR Lighting Aftersales at 023 92 674343 or via email at aftersales@ksrlighting.com.
Add New Comment