User Manual Q&AAnswer
Feb 17, 2025 - 04:53 AM
To assemble the Magic Lamp Lite Evaporative Snow Machine, follow these steps:
1. Remove all pieces from the shipping box and identify the four main parts: Lamp Head, Top Column, Bottom Column, and Lamp Base.
2. Start by running the electrical wire through the Top Column. Once the wire is successfully run through, continue by running the fluid line through the Top Column. Connect the Top Column to the Lamp Head.
3. Repeat the previous step with the Bottom Column. Run the electrical wire through the Bottom Column, followed by the fluid line. Connect the Bottom Column to the Top Column.
4. The fluid line and electrical wires should now be running through both the Top and Bottom Columns. Connect the black wire running through the Columns to the black wire at the Lamp Base, and the white wire running through the Columns to the white wire at the Lamp Base.
5. Insert the clear fluid line running through the Columns into the connector located at the Lamp Base until you hear or feel a click.
6. Align and insert the white cuff, from which the fluid line and wires are coming out, located on the Bottom Column into the black hose coming out of the Lamp Base.
7. Secure the Columns to the Lamp Base using the provided screws.
By following these steps, you will successfully assemble the Magic Lamp Lite Evaporative Snow Machine. For further assistance, you can refer to the provided user manual or contact the 24/7 tech support at (256) 229-5551.
Add New Comment