How do I set up the SPORTS ATTACK Hack Attack BB Baseball Machine? (SPORTS ATTACK Hack Attack Baseball Machine User Manual)

Answer

manuals.plus

Feb 17, 2025 - 04:53 AM


To set up the SPORTS ATTACK Hack Attack BB Baseball Machine, follow these steps:

1. Install the rear leg by pushing the leg into the socket and locking it in place.
2. Roll the machine onto the mound, approximately four feet in front of the rubber.
3. Tighten the horizontal swivel lock to secure the machine.
4. Tilt the machine forward until it rests on the throwing wheel guard.
5. Insert the two front legs into the front sockets of the undercarriage.
6. Lift the machine up and over the front legs, setting it gently onto the rear leg.
7. Position the machine by aligning the rear leg with the rubber and adjusting the machine to point directly at home plate.
8. Check that the horizontal swivel lock is tight.
9. Unlock the travel lock by turning the handle of the elevation control counter-clockwise until the bar of the travel lock snaps back.
10. Adjust the throwing head by turning the handle of the elevation control clockwise to raise the pitch to the desired height.
11. Check the machine for completeness and condition, ensuring that the throwing wheels are tight on the motor shafts and that the wheel guard and ball chute are securely fastened.
12. Plug the machine into a properly grounded electrical receptacle and turn on the on/off switch.

For more detailed instructions and illustrations, please refer to the SPORTS ATTACK Hack Attack BB Baseball Machine User Manual.