How do I install the LUCiDE 08227 POLA Wall Light? (LUCIDE 08227 POLA Wall Light Instruction Manual)

Answer

manuals.plus

Feb 17, 2025 - 04:49 AM


To install the LUCiDE 08227 POLA Wall Light, please follow the instructions below:

1. Always isolate the power before commencing installation, maintenance, or repair. It is recommended to have a qualified electrician perform the installation.

2. Pay attention to the location where the wall light will be installed. This product is suitable for indoor use only, except for bathrooms. If you intend to install it in a bathroom, please ensure it has a higher IP degree that permits bathroom use.

3. Do not install the wall light in humid places or in contact with water, liquids, or inflammable products.

4. During installation, make sure that the cables will not be squeezed or damaged by sharp edges.

5. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician to avoid any risks.

6. Allow the wall light and bulbs to cool down before touching them, as they can become very hot.

7. Always use the correct bulb type and wattage as indicated on the product.

Please note that these instructions are a summary. For more detailed installation instructions, please refer to the LUCiDE 08227 POLA Wall Light Instruction Manual provided by the manufacturer.

If you have any doubts or questions during the installation process, it is recommended to contact a qualified electrician for assistance.