User Manual Q&AAnswer
Feb 17, 2025 - 04:51 AM
To pair the remote with the receiver collar, please follow these steps:
1. Make sure the receiver collar is turned off.
2. Press and hold the receiver switch for 5 seconds until the green light flashes quickly.
3. Press the remote control pairing button to pair the receiver.
4. If pairing is successful, the receiver will beep and the green light will flash.
Note: If you are only using one receiver, you can skip this step. The following settings apply to multiple receivers with one remote.
If you want to pair multiple receivers, follow these additional steps:
1. Make sure the receiver is turned off.
2. Press and hold the receiver switch for 5 seconds until the green light flashes quickly.
3. Press the channel key to select the channel in advance and choose the number you want.
4. If pairing is successful, the receiver will beep and the green light will flash.
If you encounter any issues during the pairing process, please ensure that the receiver is connected to a power source and hold the channel switch for more than 5 seconds. If the problem persists, please contact us for further assistance.
Add New Comment