User Manual Q&AAnswer
Feb 17, 2025 - 04:32 AM
To activate the open window detection feature on the CONSORT PVE050 Panel Convector Heater, you need to access the setup menu. Here are the steps:
1. Press and hold the TEMP and MODE buttons together for 5 seconds.
2. The display will enter the setup menu.
3. Use the + and - buttons to navigate and change the values.
4. Use the TIME button to scroll between the settings.
5. Use the PROG button to exit the setup menu.
To specifically activate the open window detection feature, follow these steps within the setup menu:
1. Use the + and - buttons to navigate to the "Open Window Detection" setting.
2. Set the value to "1" to turn on the open window detection feature.
3. Use the + and - buttons to adjust the other settings related to open window detection, such as the detection time and temperature thresholds.
4. Once you have made the desired adjustments, press the PROG button to exit the setup menu.
Please refer to the installation guide for more detailed instructions and information on the open window detection feature.
Add New Comment