User Manual Q&AAnswer
Feb 17, 2025 - 04:30 AM
To install the INVIXIUM VERTU RFID Access Control device, follow these steps:
1. Remove the Mounting Plate and Screws from the box. They are placed under the product.
2. Install the Mounting Plate at the desired location, with INVIXIUM recommending a height of 120 cm from the floor to the bottom of the device.
3. Make the necessary connections to the wires on the back of the device. Refer to the "Get Wired" pages in the user guide for detailed instructions.
4. Hang the device on the Mounting Plate and secure it at the bottom with the provided xxxx .
5. Power the device using a regulated, filtered, and dedicated power source that is safety tested and certified (FCC/IC/CE) to provide 500mA at 12 VDC.
For more detailed instructions and illustrations, please refer to the "Getting Started" section in the INVIXIUM VERTU RFID Access Control User Guide.
Add New Comment