User Manual Q&AAnswer
Feb 17, 2025 - 04:26 AM
To connect the Gigawave G-AP-LITE-48 Wireless Access Point to your network, you have a few options. You can power the access point using a 48v PoE switch, a 48v PoE injector, or a 12v DC power supply. If you choose to power it via PoE, plug the LAN cable from the PoE switch or PoE injector into the WAN/PoE port on the access point. Then, connect the PoE switch or injector to your main router. If you're using a 48V injector, connect the LAN port of the injector to the main router. The access point will connect to the internet out of the box when connected to a router. You can connect to the access point using the SSID "Giga" and the password "Gigawave".
Source: gigawave G-AP-LITE-48 Wireless Access Point User Manual
Add New Comment