User Manual Q&AAnswer
Feb 17, 2025 - 04:14 AM
To set the desired temperature and time on the MI-HEAT E51 Thermostat, follow these steps:
1. Press the "MODE" button to select the desired operating mode: "Antifreeze," "Hold temperature," or "Program."
2. If you choose the "Hold temperature" mode, use the arrow buttons to adjust the desired temperature for the room. Make sure not to set the floor temperature higher than the maximum temperature specified by the floor covering manufacturer.
3. If you choose the "Program" mode, press the "MODE" button again to enter the program settings. Use the arrow buttons to navigate through the days of the week and press the "SET" button to select the desired day.
4. Once the desired day is selected, use the arrow buttons to adjust the time and temperature for each program event. Press the "SET" button to confirm each setting.
5. Repeat step 4 for each program event and day of the week.
6. After setting the desired temperature and time, press the "MODE" button to exit the program settings.
Please refer to the MI-HEAT E51 Thermostat User Manual for more detailed instructions and illustrations on how to set the temperature and time for different operating modes and program events.
Add New Comment