User Manual Q&AAnswer
Feb 17, 2025 - 04:13 AM
To clean the burner caps and crowns on the Electrolux EHG8351SCP Gas Hob, follow these steps:
1. Ensure that the hob is turned off and cooled down before cleaning.
2. Lift off the burner caps and crowns from the hob.
3. Wash the burner caps and crowns in warm, soapy water. Use a soft brush or sponge to remove any stubborn stains or debris.
4. Rinse the burner caps and crowns thoroughly with clean water.
5. Dry the burner caps and crowns completely before reassembling them onto the hob.
6. Ensure that all the flame ports, injector holes, and other holes are free of any blockage. Use a thin wire or pin to clean any clogged openings.
7. Once the burner caps and crowns are dry and clean, reassemble them onto the hob, making sure they are properly aligned.
8. Test the burners to ensure they are functioning correctly.
It is important to regularly clean the burner caps and crowns to maintain optimal performance and prevent blockages that can affect the flame quality. Refer to the user manual for more detailed instructions and safety precautions.
Add New Comment