User Manual Q&AAnswer
Feb 17, 2025 - 04:08 AM
To install the DC Terminal Protective Cover for the Sofar80-136K PV inverter, please follow the steps below:
1. First, install the inverter to the specified location as mentioned in Chapter IV of the user manual.
2. Take out the DC Terminal Protective Cover from the packing box and disassemble it into two parts using a screwdriver.
3. Place the DC Terminal Protective Cover under the inverter, as shown in the figure provided, and mark the hole positions.
4. Drill holes according to the marked positions. Ensure that the hole size is appropriate.
5. Insert the expansion bolts vertically into the drilled holes, paying attention to the insertion depth of the expanding bolt. It should be deep enough for a secure installation.
6. Fix the cover to the wall using tapping screws and flat washers.
7. Perform the cable connection according to Chapter V of the user manual.
8. Finally, as shown in the figure provided, lock the other part of the protective cover with screws.
For any further assistance or clarification, you can contact Shenzhen SOFAR SOLAR Co., Ltd through their website (www.sofarsolar.com) or via email at service@sofarsolar.com.
Add New Comment