How to assemble Lumberjack JACK Solid Wooden Woodworking Work Bench Drawer 2 Vic? (Lumberjack JACK WB1520D1 Heavy Duty Solid Wooden Woodworking Work Bench Drawer 2 Vic Instruction Manual)

Answer

manuals.plus

Feb 17, 2025 - 03:46 AM


To assemble the Lumberjack JACK WB1520D1 workbench, please follow the assembly instructions provided in the manual. Here is a step-by-step guide:

1. Start by assembling the workbench frame:
   - Take the side legs (part 1) and insert bolts (part C) through them.
   - Place washers (part C1) over the bolts.
   - Attach the lower support brackets (part 2) to the side legs by inserting the bolts through them.
   - Place dowel nuts (part B) into the pre-cut holes on the support brackets.
   - Tighten the dowel nuts using the allen key (part A).
   - Repeat this process for the second side leg.

2. Insert the bottom shelf:
   - Slide the bottom shelf (part 3) into the recess of the support brackets (part 2).

3. Attach the upper support brackets to the table top:
   - Attach the upper support brackets (part 8) to the table top (part 4) using screws (part D).
   - Secure the table top to the bench frame by inserting screws (part E) and washers (part C1) from underneath the table top.

4. Attach the vice:
   - Attach the vice (part 10) to the front of the table top (part 4) using the pre-drilled holes on the left side.

5. Assembly of the drawers:
   - Take the drawer sides (part 6) and attach the drawer back (part 5) using screws (part F).
   - Slide the drawer bottom (part 9) into the recess of the sides.
   - Attach the drawer front (part 7) to the sides and secure it with screws (part F).
   - Slide the completed drawer into the recess of the upper support brackets on the workbench.

Once you have completed these steps, your Lumberjack JACK WB1520D1 workbench will be fully assembled and ready to use.