User Manual Q&AAnswer
Feb 17, 2025 - 03:37 AM
To connect the AUTEL MaxiSys MS909 to your vehicle for diagnosis, follow these steps:
1. Connect the main cable V2.0 to the Vehicle Data Connector (DLC) on the VCI unit and tighten the thumb screws.
2. Connect the cable's 16-pin adapter to the vehicle's DLC, which is generally located under the vehicle dash.
3. Power up the Display Tablet. Ensure the tablet has a charged battery or is connected to the DC power supply.
4. Select one of the three methods (Bluetooth, Wi-Fi, or USB cable V2) to connect the Display Tablet with the VCI device and establish a communication link. Note that USB cable connection is recommended for programming.
5. When the VCI device is properly connected to the vehicle and the Display Tablet, the VCI status button at the bottom bar on the screen will show a green mark, indicating that the platform is ready to start vehicle diagnosis.
For more detailed instructions and illustrations, please refer to the AUTEL MaxiSys MS909 user manual.
Add New Comment