User Manual Q&AAnswer
Feb 17, 2025 - 03:33 AM
To change the channel on the WANNETON WLT-Q10 Two Way Radio, follow these steps:
1. Rotate the Encoder/channel xxxx to scroll up or down the channel list until you select the desired channel.
2. Refer to the table of frequencies in the user manual to determine the specific channel you want to use.
3. Keep in mind that the reception frequency could be different from the transmission frequency, or they could be the same. Simplex channels allow for communication on the same frequency, while duplex channels have different frequencies for transmission and reception.
4. Make sure all radios in your group are set to the same channel to communicate effectively.
Note: The user manual provides additional information and guidelines for using the WANNETON WLT-Q10 Two Way Radio.
Add New Comment