User Manual Q&AAnswer
Feb 17, 2025 - 03:28 AM
The LSX can be mounted using two 1/4-inch or M6 screws for clearance fit, or two 5/16-18 UNC bolts for threaded fit. The threaded fit bolts should be torqued to 12 in-lb to 16 in-lb [1.4 Nm to 1.8 Nm]. If you want to mount the LSX on existing HDLS mounting hole locations, you will need to use the adapter plate (Catalog Listing: LSXZ4022). The adapter plate is attached to the HDLS location, and then the LSX can be attached to the adapter plate using two 3/16-inch screws and the smaller mounting holes. It is important to ensure that the switch is not mounted upside down or at the low point of long conduit runs.
Add New Comment