How do I install the PHILIPS DORIS 6W LED Ceiling Lamp? (Philips DORIS 6W LED Ceiling Lamp Installation Guide)

Answer

manuals.plus

Feb 17, 2025 - 03:28 AM

Here is a step-by-step guide to help you install the PHILIPS DORIS 6W LED Ceiling Lamp:

1. Safety Precautions:
- Before starting the installation, ensure that the power supply is switched off.
- Use appropriate safety gear, such as gloves and safety glasses, during the installation process.

2. Mounting the Lamp:
- Choose a suitable location on the ceiling where you want to install the lamp.
- Ensure that the mounting surface is sturdy and can support the weight of the lamp.
- Remove the mounting plate from the lamp by unscrewing the screws.
- Hold the mounting plate against the ceiling and mark the positions for the xxxx holes.
- Drill pilot holes at the marked positions and insert wall plugs, if necessary.
- Securely attach the mounting plate to the ceiling using screws.

3. Wiring Connections:
- Connect the wires from the ceiling to the wires of the lamp.
- The lamp should have three wires: live (L), neutral (N), and ground (GND).
- Match the corresponding wires from the ceiling to the lamp wires.
- Use wire connectors or terminal blocks to make secure connections.
- Ensure that the connections are tight and insulated properly.

4. Attaching the Lamp:
- Align the lamp with the mounting plate and gently push it into place.
- Rotate the lamp clockwise until it locks into position.
- Ensure that the lamp is securely attached to the mounting plate.

5. Power Supply:
- Turn on the power supply and test the lamp.
- If the lamp does not turn on, double-check the wiring connections.
- If the issue persists, consult a qualified electrician for further assistance.

Please note that this is a general installation guide. For specific instructions and diagrams, refer to the PHILIPS DORIS 6W LED Ceiling Lamp's official installation manual provided by Philips.