Answer

Feb 17, 2025 - 03:20 AM
To set the water hardness level on the BOSCH SGS4HAW40G dishwasher, follow these steps:
1. Press the "Setup" button on the dishwasher.
2. Hold the button for approximately 3 seconds to open the basic settings.
3. The display will show "HXx".
4. Use the "Start" button to scroll through the water hardness settings until you reach the desired level.
5. Once the correct water hardness level is displayed, press and hold the "Setup" button for 3 seconds to save the settings.
Please refer to the instruction manual for a table of country-specific units and their corresponding water hardness values.
Note: Setting the correct water hardness level is important for the dishwasher to effectively adjust the amount of detergent and rinse aid used during the wash cycles.
Add New Comment