User Manual Q&AAnswer
Feb 17, 2025 - 03:19 AM
To install the iottie Terus USB Hub for Tesla, please follow these steps:
1. Slide open the front storage compartment cover in your Tesla Model 3 or Model Y.
2. Insert the USB hub on a diagonal. Then straighten the hub and slide it into place so it sits flush against the center console.
3. Connect the hub to the two existing USB-C ports.
4. Plug in your devices to the USB hub.
Please note that data transfer for streaming music, playing games, navigation, or other purposes is only possible via the USB-C I/O port (where available).
For powering the USB hub, the vehicle must be awake. Instances when the vehicle is considered awake include whenever the low voltage battery is being charged or is in use, during HV charging, when the vehicle is communicating with the mobile app, when using features such as Summon, or when features such as Preconditioning, Keep Climate On, Dog Mode, Camp Mode, Sentry Mode, etc. are enabled. Leaving a device plugged into the USB Hub does not deplete the low-voltage battery.
For more detailed information and safety instructions, please refer to the iottie Terus USB Hub for Tesla User Manual.
Add New Comment