How do I install the PHILIPS DORIS 6W LED Ceiling Light? (Philips DORIS 6W LED Ceiling Light Installation Guide)

Answer

manuals.plus

Feb 17, 2025 - 03:02 AM

Installation of the PHILIPS DORIS 6W LED Ceiling Light is a straightforward process. Here is a step-by-step guide to help you with the installation:

1. Safety Precautions: Before starting the installation, ensure that the power supply to the ceiling light is turned off to avoid any electrical hazards.

2. Mounting: Choose a suitable location on the ceiling where you want to install the light. Ensure that the mounting surface is sturdy and can support the weight of the light fixture.

3. Wiring: Connect the electrical wires from the ceiling to the corresponding wires on the light fixture. Typically, there will be three wires: a live wire (usually black or red), a neutral wire (usually white or gray), and a ground wire (usually green or bare copper). Follow the wiring diagram provided in the manual to ensure correct connections.

4. Mounting Plate: Attach the mounting plate to the ceiling using screws or other appropriate fasteners. Make sure it is securely fixed.

5. Light Fixture Attachment: Align the xxxx holes on the back of the light fixture with the mounting plate and secure the fixture in place using screws or other provided fasteners.

6. Power Connection: Once the light fixture is securely attached, restore the power supply and test the light. If it doesn't turn on, double-check the wiring connections and ensure that the power supply is properly connected.

7. Final Adjustments: If necessary, adjust the position of the light fixture to achieve the desired lighting angle or direction.

Please note that the above steps are general guidelines, and it is always recommended to refer to the specific installation instructions provided in the PHILIPS DORIS 6W LED Ceiling Light manual for accurate and detailed instructions.