User Manual Q&AAnswer
Feb 17, 2025 - 02:59 AM
Installation of the PHILIPS BALANCE 6W LED Ceiling Lamp is a straightforward process. Please follow the steps below:
1. Power off: Before starting the installation, ensure that the power to the ceiling light fixture is turned off at the main electrical panel.
2. Mounting: Determine the location on the ceiling where you want to install the lamp. The PHILIPS BALANCE 6W LED Ceiling Lamp comes with a mounting bracket. Attach the mounting bracket securely to the ceiling using screws or other appropriate hardware.
3. Wiring: Connect the electrical wires from the ceiling to the lamp. The lamp should have labeled wires for easy identification. Typically, there will be a black wire (live/hot), a white wire (neutral), and a green or bare copper wire (ground). Match the corresponding wires from the ceiling to the lamp and secure them together using wire connectors or terminal blocks.
4. Fixing the lamp: Once the wiring is complete, carefully position the PHILIPS BALANCE 6W LED Ceiling Lamp onto the mounting bracket. Align the lamp with the bracket and twist it clockwise to lock it in place. Ensure that the lamp is securely fixed and does not wobble.
5. Power on: After the lamp is securely installed, turn on the power at the main electrical panel. The PHILIPS BALANCE 6W LED Ceiling Lamp should now illuminate.
For more detailed instructions or specific diagrams, please refer to the official installation guide provided by Philips.
Add New Comment