User Manual Q&AAnswer
Feb 17, 2025 - 02:45 AM
To install the fans in the PALLAS KRX0032 KRUX Computer Case, follow these steps:
1. Open the front panel of the case by removing any screws or clips holding it in place.
2. Locate the left and right covers on the front panel and remove them.
3. Install the fans on the front panel. The manual does not provide specific instructions on fan installation, but typically, you will need to align the xxxx holes on the fan with the corresponding holes on the case and secure them using screws.
4. Optionally, you can install additional fans on the rear of the case. Again, align the xxxx holes and secure the fans using screws.
5. There is also an option to install fans on the top of the case. Follow the same procedure as mentioned above.
6. If you want to install fans on the PSU cover, align the xxxx holes and secure them using screws.
7. Once the fans are installed, you can connect them to the appropriate fan headers on your motherboard or fan controller, if available.
Note: The manual does not provide specific details on the number or size of fans that can be installed, so make sure to check the specifications of the case for the maximum fan support.
For more detailed instructions and illustrations, please refer to the PALLAS KRX0032 KRUX Computer Case Installation Guide provided with the product.
Add New Comment