User Manual Q&AAnswer
Feb 17, 2025 - 02:35 AM
To install the Rhino XD3PR 3 bar KammBar Pro system, please follow the steps outlined in the user manual. Here is a complete guide on the installation process:
1. Start by gathering the necessary tools for installation. You will need a tape measure, socket set, drill, drill bits, and a torque wrench.
2. Before installation, ensure that the vehicle's roof is clean and free of any debris. This will provide a clean surface for the KammBar Pro system to be mounted.
3. Measure the width of your vehicle's roof to determine the appropriate positioning for the KammBar Pro system. The bars should be evenly spaced and centered on the roof.
4. Place the KammBar Pro system onto the roof of your vehicle, aligning it with the measurements taken in the previous step. Ensure that it is centered and level.
5. Use the provided brackets and hardware to secure the KammBar Pro system to the roof. The brackets should be attached to the KammBar system and then bolted onto the roof using the drill and appropriate drill bits.
6. Tighten the bolts securely using a torque wrench to ensure a stable and secure installation.
7. Repeat the installation process for the remaining bars of the KammBar Pro system, ensuring they are evenly spaced and aligned with the first bar.
8. Once all bars are installed, double-check the tightness of all bolts and brackets to ensure everything is secure.
9. After installation, it is recommended to test the stability of the KammBar Pro system by applying gentle pressure and checking for any movement or looseness. If any issues are found, re-tighten the bolts as necessary.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the Rhino XD3PR 3 bar KammBar Pro system user manual for your particular vehicle model.
Add New Comment