User Manual Q&AAnswer
Feb 17, 2025 - 02:33 AM
To switch between different devices when using the Shenzhen Hangshi Technology HD315 Ergonomic Keyboard, follow these steps:
1. Turn on the keyboard.
2. Locate the device switch button on the upper right corner of the keyboard. It is labeled as Device 1, Device 2, and Device 3.
3. Tap the corresponding device button (1, 2, or 3) to switch to the desired device connection mode.
- Device 1: This mode is for the 2.4G receiver connection. If the receiver is already plugged into the USB port, it should be pre-matched. If not, plug the receiver into the USB port and press the ESC key for 3 seconds to initiate the code matching process.
- Device 2: This mode is for Bluetooth mode 1. Tap device 2, and the corresponding light will start flashing. Then, press and hold device 2 for about 3 seconds until the indicator light flashes faster. The keyboard "BT4.0+2.4G KB" can now be searched on your device for connection.
- Device 3: This mode is for Bluetooth mode 2. Tap device 3, and the corresponding light will start flashing. Then, press and hold device 3 for about 3 seconds until the indicator light flashes faster. The keyboard "BT4.0+2.4G KB" can now be searched on your device for connection.
Remember to ensure that the desired device is in pairing mode and ready to connect before switching to the corresponding device mode on the keyboard.
Add New Comment