User Manual Q&AAnswer
Feb 17, 2025 - 02:23 AM
To adjust the equalizer settings on the FREE THE TONE PA-1QG Programmable Analog 10 Band EQ Graphic Equalizer, follow these steps:
1. Press the ON/OFF switch to turn on the LED above it.
2. Press the cursor key switch to select the frequency you want to adjust (indicated by a blue dot) in the equalizer display.
3. Turn the PARAMETER encoder to adjust the boost amount of the selected frequency.
- The boost amount can be adjusted in the range of -12 dB to +12 dB.
- The selected frequency will be shown in the equalizer display.
- The boost amount for the selected frequency will be shown in the LEVEL display.
- Double-clicking the PARAMETER encoder will reset the boost amount of the selected frequency to zero. The previous value can be restored by double-clicking the encoder again.
Note: The PA-1QG model has the following frequency options: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1500 Hz, 2500 Hz, 3500 Hz, 7 kHz, and 10 kHz.
Additionally, the manual provides instructions for adjusting the preset volume, recalling presets, configuring MIDI settings, and more.
Add New Comment