User Manual Q&AAnswer
Feb 17, 2025 - 02:21 AM
To adjust the reverb sound on the FREE THE TONE AS-1R Digital Reverb, follow these steps:
1. Press the ON/OFF switch to illuminate the LED above it.
2. Turn the MODE encoder to select the desired reverb type. The available reverb types are SPRING, PLATE, ROOM, HALL, CAVE, and SERENE.
3. Turn the MIX xxxx to adjust the mixture level between the original and reverb sounds. Turn it clockwise for more reverb and counterclockwise for less reverb.
4. Turn the TONE xxxx to adjust the tone of the reverb sound. Turn it clockwise for brighter tones and counterclockwise for darker tones.
5. Turn the DECAY xxxx to adjust the decay time of the reverb sound. Turn it clockwise for longer decay times and counterclockwise for shorter decay times.
6. Turn the PRE DELAY xxxx to adjust the delay to start feeding the reverb sound. Turn it clockwise for longer pre-delay times and counterclockwise for shorter pre-delay times.
By adjusting these parameters, you can customize the reverb sound to your preference. Refer to the owner's manual for more detailed instructions and information on the different reverb types available.
Add New Comment