User Manual Q&AAnswer
Feb 17, 2025 - 02:17 AM
To install the Schreder YOA Rope Suspension Street Light, follow these instructions:
1. Ensure that the power is switched off before starting the installation process.
2. Gather the necessary tools required for installation.
3. Take note of the dimensions of the street light:
- A: D500mm (19.7 in)
- B: 530mm (20.9 in)
- C: 345mm (13.6 in)
4. Position the luminaire in the desired location for installation.
5. If using PVC insulated mains cable, make sure the entire cable is protected against climatic conditions, such as UV rays and rain. This can be achieved by ensuring the cable is contained inside the luminaire and pole Y-connection.
6. In case of any damage to the wire, it should only be replaced by the manufacturer, distributor, or an expert to avoid risks.
7. Once the above steps are completed, the installation of the Schreder YOA Rope Suspension Street Light is considered complete.
Please refer to the Schreder YOA Rope Suspension Street Light Instruction Manual for more detailed instructions and safety guidelines.
Add New Comment