User Manual Q&AAnswer
Feb 17, 2025 - 01:49 AM
To install the anti-tip bracket for the Whirlpool W11509598A Freestanding Electric Range, follow these steps:
1. Locate the anti-tip bracket, which is included with the range and is usually taped inside the storage drawer or warming drawer.
2. Determine whether you will be using the floor or wall mounting method. If you have a stone or masonry floor, you can use the wall mounting method. If you are installing the range in a mobile home, you must secure the range to the floor.
3. Determine the centerline of the cutout space and position the mounting bracket against the wall in the cutout so that the V-notch of the bracket is 12 9/16" from the centerline.
4. Drill two 1/8" holes that correspond to the bracket holes of the determined mounting method.
5. Using a Phillips screwdriver, mount the anti-tip bracket to the wall or floor with the two #12 x 1 5/8" screws provided.
6. Move the range close enough to the opening to allow for final electrical connections. Remove the shipping base, cardboard, or hardboard from under the range.
7. Move the range into its final location, making sure the rear leveling leg slides into the anti-tip bracket.
8. Move the range forward onto the shipping base, cardboard, or hardboard to continue installing the range.
Please refer to the owner's manual for more detailed instructions and illustrations on how to install the anti-tip bracket for your specific model.
Add New Comment