User Manual Q&AAnswer
Feb 17, 2025 - 01:46 AM
Installation of the KINGDELY KF100216-01 20 ft. Sectional Flag Pole Kit is a straightforward process. Here is a step-by-step guide to help you with the installation:
1. Unpack the contents: Start by unpacking the flag pole kit and ensuring that all the components are present. The kit should include the flag pole sections, the American flag, the golden ball, and any necessary hardware.
2. Choose a suitable location: Select a suitable location for installing the flag pole. It should be an area with enough space for the flag to fly freely without obstruction. Make sure there are no overhead power lines or trees that could interfere with the flag's movement.
3. Dig the foundation hole: Dig a hole for the foundation of the flag pole. The depth of the hole should be approximately one-third of the total height of the flag pole. For a 20 ft. flag pole, the hole should be around 6-7 ft. deep.
4. Pour the concrete foundation: Mix the concrete according to the manufacturer's instructions and pour it into the foundation hole. Ensure that the concrete is level and allow it to cure for the recommended time.
5. Assemble the flag pole sections: Start by connecting the flag pole sections together. Follow the instructions provided in the manual to securely attach each section. Make sure the sections are aligned properly and tightened securely.
6. Attach the flag and golden ball: Once the flag pole is assembled, attach the American flag to the top of the pole using the provided hardware. Ensure that the flag is properly aligned and secured. Then, attach the golden ball to the top of the flag pole.
7. Raise the flag pole: With the help of a friend or family member, carefully lift the flag pole and insert the bottom end into the concrete foundation. Ensure that the pole is straight and centered in the hole.
8. Secure the flag pole: Once the flag pole is in position, use the provided hardware to secure it to the foundation. Follow the instructions in the manual to properly secure the flag pole and prevent it from swaying or falling.
9. Test and adjust: After securing the flag pole, test it by raising and lowering the flag. Make any necessary adjustments to ensure the flag flies freely and remains visible.
Please note that the above instructions are a general guide. It is essential to refer to the specific installation manual provided with the KINGDELY KF100216-01 20 ft. Sectional Flag Pole Kit for detailed and accurate instructions tailored to the product.
Add New Comment